A(nother) real entry range saber sound board !
[all our videos on you tube
THIS IS THE LIGHT SIDE VERSION
All the details and specs of the Pico Crumble v2.5 here
The module plays realistic digital sound effects (22.050 kHz / 10 bit) store on the board (no SD card). The board comes either in "Light" or "Dark" version, and feature a pair of soft/hard swing sounds, a pair of soft/hard clash sounds, along with the regular power on, power off and hum sounds.
Parameters remain accessible via RICE-Edge thought the board isn't made to be adjusted much, but rather for build volumes.
It embed a unique service menu allowing to quickly reconfigure the blade color among 15 profiles and is designed mostly for a 9W RGB LED.
(video below is a demo of V1 with less sounds diversity)
Power supply : 3.3 to 5.5 V / 4A per channel (with the Luxeon LED). SINGLE li-ion cell (1x18650 or 1x14500) battery recommended.
On/Off control of the module is achieved with a momentary switch only (must be purchased separately). Wiring supplies and speaker to be ordered separately. It is NOT equipped with a current driver or regulator, therefore external power resistors might be required to operate the module in certain conditions.
Download the user's manual
of this module for detailed features and operations.
Dimensions : 24x18x3 mm
Idle current consumption : 11nA - Extra long shelf time with no kill-key
Compatibility : luxeon star III, V, K2, rebel, seoul P4, Ledengin, tri-rebel, tri-cree
Speaker : 4-8 ohm, up to 2W. NOT provided