A real entry range saber sound board !
[all our videos on you tube
All the details and specs of the Nano Biscotte v3 here
Version 3 has an on board Power Extender for the Flash on Clash effect, the external PEx is no longer required.
The module plays realistic digital sound effects (22.050 kHz / 10 bit) from a µSD card. Sounds can be changed by the user using a USB SD card reader. The units has several sound slots including power on, humming, swing (8 slots), clash (8 slots) and power off. On/Off control of the module can be done with a momentary switch only (must be purchase separately). Comes with a microSD card. Wiring supplies and speaker to be ordered separately.
►The board comes with 2 sound banks "Light Meat" & "Dark Meat" installed on the microSD. You can obtain more sound fonts at saberfont.com, see this page.
Like the CFSC and the PC, the Nano Biscotte handles WAV files. It is however NOT equipped with a current driver or regulator, therefore an external power resistor is required to operate the module in certain conditions
Download the user's manual
of this module for detailed features and operations.
Dimensions : 28.5x18.5x5 mm (with the microSD card).
Power supply : 3.3 to 5.5 V / 1.5A (with the Luxeon LED). SINGLE li-ion cell (1x18650 or 1x14500) battery recommended.
Idle current consumption : < 100 µA
Compatibility : luxeon star III, V, K2, rebel, seoul P4, Ledengin, tri-rebel, tri-cree
Speaker : 4-8 ohm, up to 2W. NOT provided, must be purchased separately here