Sound and light Fx electronic board for Blaster (or any scifi props)
COLOR MINI SCREEN VERSION
Now playing videos !
Inherited from Crystal Focus Saber Core™
, Blaster Core™
is dedicated to blasters and other scifi props. Fully engineered and built by Plecter Labs, this electronic board allows you to play digital quality sounds with synchronized light effect such as the blaster ray propagation in the barrel and the nozzle flash.
The board embeds a removable SD card and plays 22.050 kHz
/ 16 bit sounds. Those sounds a totally changeable by the user with a simple and inexpensive USB card reader.
The module plays back various blaster sounds, firing mode selection (single / full auto), reload/recharge, jamming and so on.
Version 4.0 features numerous upgrades :
- WAV file support
- FAT16 & FAT32 support
- Embedded PEx for the main AND auxiliary muzzle flash
- Clip in / Clip Out sounds
- Jamming simulator
- The blaster ray propagation Fx is fully configurable, on 16 stages, and is described in a separate text file. Same for the aux. ray (stun / grenade). This allow to create unique tracing visual fx, remanence, strobing or completely static.
- Selection of the electrical circuit(s) activated during the flash, for the main flash or the aux. flash. Each kind of blast can activate the main circuit, the aux circuit, both, or none of them. This allow the user to create color combination for the blast flash using an RGB LED !
- Blast Light Fx (the nozzle flash, normal or aux.) is now fully configurable : static, stomboscope, randomized etc.
- A micro SD card replaces the regular SD : the module is now only 6 mm thick !
- Selectable barrel ray color (see the satellite board for an easier wiring)
- Crystal clear 2W audio amp
- The version with the mini screen now plays videos (selectable) during the boot and the screen saver
►Provided with a SD card including 6 sound banks : the module allows to select among several sound fonts on a single blaster using a vocal menu, just like Crystal Focus..
: 43.5x27x6 mm (with the SD card)
: 3.5 à 11 V. Four AA alkalines (LR06) or rechargeable ni-mh / 1000 to 2500 mAh recommanded or better, 2 li-ion cells 18650 or 14500 (7.4v). A 9V battery can also work for a small blaster if the nozzle flash LED isn't a high power one.
: < 20 mA
: Luxeon LED for the nozzle flash (with proper batteries) up to 1.5A, superflux LEDs (RGB) or classic 5 mm LEDs ofr the ray propagation effect in the barrel.
Wiring supplies, speaker and satellite board must be purchase separately.
: Color graphic display with its µSD card.
Download the user's manual
to discover all the possibilities of this module !
A few work examples made with Blaster Core :